Cal Kestis 'The Survivor'

Presenting The Survivor, a high quality saber replica of the popular Cal Kestis saber design from the Jedi: Fallen Order videogame and featured in the upcoming Jedi: Survivor trailers.

Designed by Jimmy's Saber Junk and manufactured by Saberbay, this saber is a CNC machined empty hilt. The custom box art design was made by Christian Cruz.
Basic hilt dimensions: Empty hilt weight is 13.5 ounces with a total length from emitter tip to pommel end of 15.5 inches.

Including with this listing:
-One empty almost fully assembled Survivor hilt. (Please note that you will need to secure the painted emitter piece and the cover piece that goes over the 3 set screw by your own methods once final assembly is ready.)
-blade retention key for emitter and for the 6 set screw used to hold the inner black piece.

This hilt is designed to allow the emitter and grip to be clocked to your desired orientation. Please send me an email if you need instructions on how to do so after receiving.

Made from polished aluminum parts, matte black anodized sections, real copper piece in the thin neck area, and hand painted accents.
Emitter designed for 1" blades, and ample internal install space for a variety of chassis designs.
Hidden sound venting originates from the center in the cutouts underneath the switch, and the single switch is a spring loaded actuator.
Making a staff is very simple when using two hilts, by simply removing the single pommel and attaching the secondary hilts upper half to the threading on the opposite end of the grip handle.

To view proper installation instructions, be sure to watch this video first. Watch HERE

This is the accessory add on for The Survivor hilt from Saberbay/Jimmy's Saber Junk
This is a damaged grip and pommel replacement for the standard grip and pommel that is included with The Survivor hilt.
This add on is not compatible with other hilts.
Includes one damaged grip made from CNC machined black anodized aluminum, that can be swapped with the standard grip section, one highly detailed pommel printed in Multi Jet Fusion black material, and 6 brass rods that can be inserted into the designated areas on the pommel and configured or bent to your liking.

3D printed chassis design for The Survivor hilt. Not compatible with any other hilt design. Please note this is only for the SINGLE hilt version, not compatible with the staff.
Printed in black PLA+ filament. This chassis is separated by up to five different pieces.
This is a medium tier/advanced level install, and not recommended for first timers or beginners. Please reach out to us or your preferred installer for recommendations.

Physical chassis images shown are examples of a completed fully installed chassis, painted with Rub N' Buff. Please note that this does not come fully installed or painted.
The chassis design features two points of Twist N' Click contact. One for the upper section which allows the chassis to be removable, and the second where the bottom crystal chamber is located, which can be swapped for either the Survivor version or the Fallen Order version.

The Survivor version features a shorter crystal chamber on the bottom, and a shorter resin printed crystal.
The Fallen Order version features a longer crystal chamber on the bottom, and a longer resin printed crystal.
Please note that the Fallen Order version is only intended for the damaged grip/pommel add on version of the Survivor hilt, and will not fit the standard Survivor hilt.

Parts list for install:
-CFX, Proffie, GHV3 or Verso soundboard
-Quantity of up to 2 NPXL shortpin connectors(one for the emitter section, and one for the secondary bottom crystal chamber, if used)
-Blade Side PCB(this is required to use the secondary bottom crystal chamber)
-Thin Neck PCB connector set
-Rotary Chassis PCB connector set
-removable 18650 battery(battery contacts provided with chassis)
-single 1.5mm brass tactile switch(switch provided with chassis)
-22mm Veco 4ohm/3W bass speaker
-high amp killswitch(optional)
-OLED Screen(TCSS, KR Sabers, or Saberbay versions all compatible, also optional)
-Bluetooth Breakout Board Module(optional with correct chassis version)
-Quantity of up to 2 single BTF pixel accents for crystal chambers

Depending on your chassis version, you will also receive two short resin printed crystals for the Survivor version, or one short and one long resin printed crystal for the Fallen Order version.

Presenting The Survivor, a high quality saber replica of the popular Cal Kestis saber design from the Jedi: Fallen Order videogame and featured in the upcoming Jedi: Survivor trailers.

Designed by Jimmy's Saber Junk and manufactured by Saberbay, this saber is a CNC machined empty hilt. The custom box art design was made by Christian Cruz.
Basic hilt dimensions: Empty hilt weight is 13.5 ounces with a total length from emitter tip to pommel end of 15.5 inches.

Including with this listing:
-One fully assembled Survivor hilt installed with the chosen soundboard selected.
-blade retention key for emitter and for the 6 set screw used to hold the inner black piece.

This hilt is designed to allow the emitter and grip to be clocked to your desired orientation. Please send me an email if you need instructions on how to do so after receiving.

Made from polished aluminum parts, matte black anodized sections, real copper piece in the thin neck area, and hand painted accents.
Emitter designed for 1" blades, and ample internal install space for a variety of chassis designs.
Hidden sound venting originates from the center in the cutouts underneath the switch, and the single switch is a spring loaded actuator.
Making a staff is very simple when using two hilts, by simply removing the single pommel and attaching the secondary hilts upper half to the threading on the opposite end of the grip handle.

This is a made to order item and can take up to 4-5 weeks for completion. Timeframes are an estimate and subject to change.
Chassis design can be fully removed from the hilt if needed for exterior customization after receiving. Please email me if you need instructions on how to do.

The chassis is a Twist N' Click design made by Jimmy's Saber Junk. When the chassis is inside the hilt, gently twist to the left and release the mechanism holding the main body for soundboard and removable battery access.
Install details:
-CFX, Proffie, GHV3, or Verso soundboard
-NPXL V3 shortpin hiltside connector
-single button operation
-ShtokCustomWorx Rotary Chassis PCB set
-22mm Veco 4ohm/3W bass speaker
-removable 18650 KeepPower 300m0mah 15A protected cell battery
-high amp killswitch

3D printed chassis design for The Survivor hilt. Not compatible with any other hilt design. 
Printed in black PLA+ filament. This chassis comes in two pieces, which thread together in the thin neck portion of the hilt.
Please note, this design does NOT work for the staff configuration, this is for a single hilt version.
Parts list below:
-CFX, Proffie, GHV3 or Verso soundboard
-NPXL shortpin connector for emitter section
-removable 18650 battery(battery contacts provided with the chassis)
-single 1.5mm brass tactile switch(switch provided with the chassis)
-22mm Veco 4ohm/3W bass speaker
-high amp killswitch(optional)
-single BTF pixel accent for damaged pommel illumination(optional)

3D printed chassis design for The Survivor hilt. Not compatible with any other hilt design. 
Printed in black PLA+ filament. This design is printed in three pieces.
This design is compatible with BOTH the single hilt and for staff configuration. You will require two sets of hilts and chassis designs for a staff.
Chassis design features Jimmy's Saber Junk's Twist N' Click capability, which allows chassis removal with a counter clockwise twist and release motion, and chassis retention achieved with the opposite motion.
Parts list for install:
-CFX, Proffie, GHV3 or Verso soundboard
-NPXL shortpin connector for emitter section
-Thin Neck PCB connector set
-Rotary Chassis connector set
-removable 18650 battery(battery contacts included with chassis)
-single 1.5mm brass tactile switch(switch included with chassis)
-22mm Veco 4ohm/3W bass speaker
-high amp killswitch(optional)
-single BTF pixel accent(optional)

This is a covertech wheel attachment for the Survivor hilt. 
The small kit comes with:
-anodized black aluminum machined covertech wheel
-replacement aluminum bar with goes in place of one of the plates that cover the 3 screws on one side
-two slotted M3 screws
-one allen head M3 screw (black)

The covertech wheel itself is 18.4mm wide, with a 2mm inner slot for covertech clips.

To install this covertech, simply replace the standard small plate that comes with the Survivor hilt with the aluminum one provided with this assembly.
Thread in the two slotted screws on the outer holes, which should sit flush.
Thread in the black allen head screw over the covertech wheel.

This is the Survivor hilt with the damaged grip and pommel piece to make the Fallen Order version of this hilt. This version will NOT include the repaired grip used in the standard Survivor hilt kit.

For proper damaged grip setup and assembly, please watch this video HERE

Weathered example photos are courtesty and property of Astoria Workshop. You can contact him for a weathering quote at his Facebook page here or his Instagram page here

Presenting The Survivor, a high quality saber replica of the popular Cal Kestis saber design from the Jedi: Fallen Order videogame and featured in the upcoming Jedi: Survivor trailers.

Designed by Jimmy's Saber Junk and manufactured by Saberbay, this saber is a CNC machined empty hilt. The custom box art design was made by Christian Cruz.
Basic hilt dimensions: Empty hilt weight is 13.5 ounces with a total length from emitter tip to pommel end of 15.5 inches.

Including with this listing:
-One empty almost fully assembled Survivor hilt. (Please note that you will need to secure the painted emitter piece and the cover piece that goes over the 3 set screw by your own methods once final assembly is ready.)
-blade retention key for emitter and for the 6 set screw used to hold the inner black piece.
-collector's display box
-damaged grip to replace repaired grip version
-MJF printed pommel
-aluminum threaded adapter for pommel to grip connection
-6 brass rods for pommel accents(can be glued in)

This hilt is designed to allow the emitter and grip to be clocked to your desired orientation. Please send me an email if you need instructions on how to do so after receiving.

Made from polished aluminum parts, matte black anodized sections, real copper piece in the thin neck area, and hand painted accents.
Emitter designed for 1" blades, and ample internal install space for a variety of chassis designs.
Hidden sound venting originates from the center in the cutouts underneath the switch, and the single switch is a spring loaded actuator.
Making a staff is very simple when using two hilts, by simply removing the single pommel and attaching the secondary hilts upper half to the threading on the opposite end of the grip handle.