Republic Commando

This is the Republic Commando saber hilt from the game itself made back in 2005. Made by Saberbay and designed by Jimmy's Saber Junk.
This is a full metal CNC machined hilt made from various metals.
Hilt design features polished aluminum for the emitter, control box and pommel, as well as real brass parts for the thin neck, and real polished copper.
Main body is a dark grey anodized color.
Control box features two spring loaded actuators, and two clear shine through pieces that are illuminated from your accent LED's below. 
Inner dimensions of the hilt allow a 1" blade, featuring a hidden blade retention screw, as well as robust room for a variety of electronics, including 28mm speakers and up to 21700 sized batteries.

Total weight with electronics installed is about 19oz.

Saber length is 11”

Chassis designs can be found here for this specific hilt Click Here

Listing includes a fully assembled saber as shown, collectors display box and allen wrenches for blade and covertech wheel screw.

MADE TO ORDER INSTALLED VERSION DETAILS:

Fully installed Republic Commando

Please read all listing details and information below before purchasing.

This saber is installed with CFX or Proffie, with Neopixel capability.

The chassis design is fully removable, using Jimmy’s Saber Junk design, 3D printed in black PLA+ filament. Chassis is inserted from the pommel, after unscrewing the pommel, and aligns perfectly in place within the hilt when fully inserted and pommel reattached. The chassis is removed by taking off the pommel and gently pushing the top of the chassis down through the emitter with your finger/hand, and grabbing the bottom of the chassis once it shows the pommel end and pulling the chassis out.

Full parts details below:

-CFX or Proffie soundboard option

-NPXL V3 Shortpin hiltside connector

-two button configuration(top for main, bottom for auxiliary)

-two pixel accent LED’s independently programmed for a red and green color(can be changed by the end user by their own programming)

-high amp killswitch

-removable 18650 KeepPower protected cell battery, 15A 3000mah, with custom battery wrap

-28mm X-BASS 4ohm/3W speaker   

This listing is for the installed saber and box only, no other parts not described in this listing are included, please allow up to 4-5 weeks for installation.

 

Install chassis for the Republic Commando saber hilt made by Saberbay and designed by Jimmy's Saber Junk. Not compatible with any other hilt design.
Fully removable chassis design with multiple variations and options. All physical prints are 3D printed in black PLA+ filament, crystal chamber parts can be painted by the end user.
Please read each chassis version description carefully to ensure you get the correct parts for the build. Battery contacts and tactile switches included with physical chassis purchases.

STANDARD VERSION:
-CFX, Proffie, GHV3, or Verso soundboard 
-NPXL shortpin connector (V3 or ECO)
-18650 or 21700 battery (Please select your preferred option)
-high amp killswitch (optional for install, but recommended)
-28mm bass speaker
-two 1.5mm brass tactile switches(included with chassis purchase)
-OLED screen (not available for Verso, or 21700 battery option)
-two pixel accent LED's (required for control box illumination)

CRYSTAL CHAMBER VERSION(printed in 3 parts):
-CFX, Proffie, GHV3, or Verso soundboard
-NPXL shortpin connector (V3 or ECO)
-18650 or 21700 battery (Please select your preferred option)
-high amp killswitch (optional for install, but recommended)
-28mm bass speaker
-two 1.5mm brass tactile switches(included with chassis purchase)
-OLED screen (not available for Verso, or 21700 battery option)
-three pixel accent LED's (required for control box illumination, and crystal chamber)

3D printed chassis for the Republic Commando sold here at Saberbay and designed by Jimmy's Saber Junk.
This chassis is printed in black PLA+ filament and printed in three different parts.
There are several variations of this chassis so please make sure to order the correct type based on your needs.
Parts list required for install:
-CFX, Proffie, GHV3, or Verso soundboard
-NPXL V3 shortpin hiltside connector (V3 or ECO)
-two 1.5mm brass tactile switches(included with chassis print)
-removable 18650 or 21700 battery(spring loaded contacts included with chassis print)
-high amp killswitch (optional, recommended)
-28mm bass speaker
-OLED screen (optional, TCSS or KR Sabers or Saberbay type compatible)
-up to 3 single pixel accent LED's (two for control box LED accents and one for crystal chamber

Fully installed Republic Commando

Please read all listing details and information below before purchasing.

This saber is installed with CFX, with Neopixel capability.

The chassis design is fully removable, using Jimmy’s Saber Junk design, 3D printed in black PLA+ filament. Chassis is inserted from the pommel, after unscrewing the pommel, and aligns perfectly in place within the hilt when fully inserted and pommel reattached. The chassis is removed by taking off the pommel and gently pushing the top of the chassis down through the emitter with your finger/hand, and grabbing the bottom of the chassis once it shows the pommel end and pulling the chassis out.

Full parts details below:

-CFX or soundboard option

-NPXL V3 Shortpin hiltside connector

-two button configuration(top for main, bottom for auxiliary)

-two pixel accent LED’s independently programmed for a red and green color(can be changed by the end user by their own programming)

-high amp killswitch

-removable 18650 KeepPower protected cell battery, 15A 3000mah, with custom battery wrap

-28mm X-BASS 4ohm/3W speaker   

This listing is for the installed saber and box only, no other parts not described in this listing are included, please allow up to 4-5 weeks for installation.