Install chassis for 89Sabers OWK1 TPM hilt. 3D printed chassis comes in two parts. Top half holds the following parts: -NPVL V3 Long pin connector -NPVL V3 lens cover *older style* -brass tactile switches 1.5mm height -flat side PCB Rotary Chassis PCB set In order to install top half of chassis, silver plate must be removed from inside of the hilt first. Top half needs to be fully pressed all the way up and switch channels lined up with switch plunger holes. Always test fit your chassis before installing to ensure proper fitment and alignment of tactile switches.
Bottom half of chassis can hold the following parts: -Soundboard option chosen(CFX, Proffie, GHV3) -pin side PCB of Rotary Chassis PCB set -OLED screen(optional) -removable 18650 battery -battery contacts(provided with chassis) -22mm speaker (KR Sabers or Veco)
Please read to see what comes with each listing variation:
CHASSIS PARTS ONLY: 3D printed chassis parts to hold specified soundboard, brass tactile switches, and battery contacts. NO OTHER PARTS INCLUDED
PARTS + SOUNDBOARD: parts included with CHASSIS PARTS ONLY, as well as the soundboard itself with SD card, NPXL V3 Assembled Longpin connector, V3 older style lens, 18650 15A 3000mah Keeppower battery, OLED screen, Rotary Chassis PCB set with pins, 22mm KR Sabers speaker.
PARTS NO SOUNDBOARD: All parts listed above with the exception of NO SOUNDBOARD INCLUDED