The SK1 from our vendor TXQ. Based on Galen Marek's first saber from The Force Unleashed. Available as an empty hilt, or installed with Proffie, please make sure you select the correctly desired option. Each saber includes the saber, custom saber stand, instruction manual, charging cable, and allen wrench and retention screws.
Saber can accommodate 1" blades, and a removable chassis system that is easy to use. Neopixel connectors will have built in blade matching LED's, as well as an exposed illuminated blade matching crystal chamber. Emitter section also features two shine through accents that illuminate with the blade color. All installed sabers are equipped with two button function in the control box, and the removable chassis with access to the soundboard, and removable battery. USB charging is also possible for the chassis, and batteries included are KeepPower 18650 protected cells.
This listing does not include a blade(purchased separately)
Basic install chassis for the TXQ Starkiller 'SK1' hilt. This is a 3D printed chassis in PLA filament. Two pieces are included, one for the main chassis and a second for the control box switch holders. Please note the images used in the listing are showing an installed version, this is not what is included with the sale, this is for the chassis design only. For chassis retention, you will need to drill and tap an additional hole in the threaded adapter lined up with one of the three screws located around the middle of the hilt, underneath the main grip section. If you are not able to do this yourself, please send me a message if you are buying the empty hilt as well and I will do this for you. Parts list for install: -CFX, Proffie, or GHV3 soundboard -18650 removable protected button top battery -28mm bass speaker -removable battery contacts(provided with the chassis print, Option 3) -single pixel accent for crystal chamber illumination -two brass 1.5mm tactile switches(provided with the chassis print) -NPXL hiltside connector with a 1" holder(not a part of the chassis but required for wiring up the emitter)