This is the 89Sabers Count Dooku saber replica. This is the most recent V3 model. Comes as an empty hilt kit for DIY purposes or display, does not come fully installed or include and other parts or electronics not shown. This is a high quality replica made from chrome plated brass and other CNC machined parts. Product images show various points of disassembly. Emitter takes a 7/8" blade (not included) This item will need some minor assembly for accurate display, and include all the extra parts shown in the first image. The clear red trigger piece can be a press fit into its holder, or also glued in place for extra security. The brass piece by the emitter comes with a tactile switch PCB that can be used for an install, and needs to be glued in place. Brass actuators located near the red trigger area, can go in using a chassis designed to support them from inside the hilt, otherwise they will drop through the holes. Includes a 7/8" blade plug, extra screws and allen wrenches.
To separate the hilt from the middle, use the slotted screw located at the bottom of the claw to undo this section and pull it apart. Make sure not to overtighten or strip the slotted screw. The pommel section is opened by unscrewing the gold screw on the side using one of the provided allen wrenches. Again be cautious with this screw to avoid any stripping.