Please checkout YouTube video tutorial link below
3D printed removable chassis for the 89Sabers K4 Kenobi hilt.
This chassis is printed in multiple pieces.
1. Main body-Holds CFX or Proffie soundboard, A/style 1.3mm recharge port(optional),high amp killswitch, pogo connector pins, 89Sabers K4 switch assembly, 18650 Keystone battery holder, 18650 removable battery, 7/8” short NPXL holder for NPXL short pin connector, OLED screen(optional). 3mmx3mm magnets for speaker pod.
2. Speaker pod-Holds 28mm bass speaker, pogo connector PCB, and 3mmx3mm magnets.
3. Speaker pod sleeve attaches to speaker pod to improve sound resonance. See pictures for example.
4. Grenade section PCB holder-holds the blade side PCB which is used to connect to NPXL connector on the chassis. Needs to be wired up to the NPXL connector in the emitter.
Due to 3D printer tolerances, some sanding may be required for a press fit.
Available as 3D printed chassis only or as a complete install package with all parts included MINUS SOUNDBOARD. Due to chip shortages we are unable to provide boards at this time.
Install package will include:
-3D printed chassis parts
-NPXL V3 short pin unassembled connectors(2)
-1” short pin holder(for emitter)
-7/8” short pin holder(for chassis)
-Blade side PCB w/o LED’s(for grenade section holder)
-18650 battery holder and 18650 Keeppower 3000mah battery
-Blue OLED screen
-pogo speaker connector set
-high amp killswitch
-A style 1.3mm recharge port
-KR Sabers 4ohm/3W bass speaker
Install packages are sold as is, please do not ask for part substitutions. If there are parts you do not wish to use for your build, we still carry all of the parts individually listed as well.