89Sabers Skinnyflex saber kit. This is Anakin Skywalker's saber replica from ROTS. This is an empty hilt and does not come fully installed or with any electronics or other parts not shown. Listing includes the empty saber, 7 rubber grips (6 are required for attachment, plus one extra), 7/8" blade plug, extra vented pommel, clamp card, switch PCB, gold control box side piece, two springs, and copper button cover. Customers will be required at attach their own grips, either by freehand or using a grip guide, peeling off the plastic layer on the backs of the rubber grips. Saber is chrome plated brass on most of the surface. Emitter can take a 7/8" blade. Top copper button below the bunny ears can be used as a spring loaded actuator. The hilt can come apart at the grip section underneath the control box. The control box gold side piece can be secured by using the two included springs as shown in the image. Clamp card needs to be either glued or affixed using double sided adhesive. Bottom copper button will need to be glued or affixed using double sided adhesive.