STL FILE 89Sabers Darth Vader MPP Chassis CFX
STL FILE 89Sabers Darth Vader MPP Chassis CFX
STL FILE 89Sabers Darth Vader MPP Chassis CFX
STL FILE 89Sabers Darth Vader MPP Chassis CFX
STL FILE 89Sabers Darth Vader MPP Chassis CFX
STL FILE 89Sabers Darth Vader MPP Chassis CFX
STL FILE 89Sabers Darth Vader MPP Chassis CFX
STL FILE 89Sabers Darth Vader MPP Chassis CFX

STL FILE 89Sabers Darth Vader MPP Chassis CFX

Regular price $20.00 Save $-20.00
/
Shipping calculated at checkout.

This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment. 

This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.

After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. 
The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.

 

Install chassis for the 89Sabers Darth Vader MPP hilt kit.

This a 3D printed chassis in black PLA + filament. 

Chassis is held in place by one of the M3 retention screw holes throughout the middle section of the hilt. 

Chassis can hold the following parts:

-CFX or Proffie or GoldenHarvestV3 soundboard

-removable 18650 button top battery

-28mm bass speaker

-high amp killswitch(optional)

-OLED screen(optional)

-battery contacts provided with the chassis

Chassis can also be purchased with a parts kit, with all components required for the install. You can choose this option with or without the soundboard.

Parts kit will include the following:

FOR SOUNDBOARD INCLUDED OPTIONS-

-Chassis for desired board plus battery contacts

-Choice of soundboard(CFX or Proffie)

-NPXL V3 Connector set(unassembled longpin connector, 1" Holder, and lens cover)

-18650 KeepPower 3000mah 15A high drain battery

-28mm 4W/3ohm high bass speaker

-high amp killswitch

-OLED screen

 FOR PARTS KITS NOT INCLUDING THE SOUNDBOARD:

-All same parts as above but minus the soundboard for the desired chassis type.

 Please note that is a DIY kit only, you are responsible for all self installation of parts and we are not liable for any user error or mishandling of components. Please refer to your preferred soundboard's manual for proper wiring schematics.

 

 

 

Customer Reviews

Based on 2 reviews Write a review