Dark Intromnia Saber Kit *CONTROL BOX EDITION*
No reviews
- Free Shipping for all Domestic Orders Over $75
The 'Dark' edition of the Intromnia hilt.
This version also includes a 3D printed control box which replaces the red trigger faux switch normally on the hilt. The red trigger will still be included with the hilt as a separate accessory.
The slot for the clamp card section can accommodate up to a 49mm x 15mm x 1mm sized clamp card. In the example pictures, I am using a Creepy Uncle clamp card.
For this version, the control box will be included not attached on the hilt. You must do yourself with E6000 and also apply the rubber grip on yourself.
This is because if you change your mind and use the red trigger instead, the access point to the screws holding the trigger piece on is located underneath the applied rubber grip.
The Intromnia hilt design is a Saberbay exclusive, from my own custom design inspired from multiple other hilt designs seen in the SW universe.
Concept design was done in house at Saberbay, with additional concept rendering from Shadowfoil Props and final design renders and engineering from Jimmy's Saber Junk.
Please note this listing is for the hilt only, electronics and other parts required for install are not included. Installed pictures are for example only.
Full CNC machined hilt, made from polished and anodized aluminum pieces, as well as polished brass in various sections.
The hilt features 1" emitter, with a blade depth of 2.4" when fully installed.
Total length of the hilt is 11.5" with a weight of 22 oz. when fully installed.
The internal size allows for a fully removable chassis design, which can be purchased separately HERE
Hilt assembly is not required, the hilt will ship to you exactly as shown in the pictures.
For correct pommel assembly/disassembly for install purposes, please watch this helpful video from Jimmy's Saber Junk, video HERE
Aesthetic hilt features:
-high grade 6063 aluminum construction, CNC machined
-Matte black anodizing for the emitter shroud, and pommel fins
-polished brass material for emitter piece, pommel cap and midsection
-two spring loaded actuators, with shine through capability
-brass thumbscrew for blade retention
-red acrylic accent for added dexterity and grip
-rubberized grip mid section for comfortable holding
-polished aluminum for main body and pommel parts
-external crystal chamber in the pommel, capable of accent LED illumination
Special engineering features allow the pommel fins to be clocked to your desired position by loosening and retightening the middle brass section independently from the main body of the hilt.
This version also includes a 3D printed control box which replaces the red trigger faux switch normally on the hilt. The red trigger will still be included with the hilt as a separate accessory.
The slot for the clamp card section can accommodate up to a 49mm x 15mm x 1mm sized clamp card. In the example pictures, I am using a Creepy Uncle clamp card.
For this version, the control box will be included not attached on the hilt. You must do yourself with E6000 and also apply the rubber grip on yourself.
This is because if you change your mind and use the red trigger instead, the access point to the screws holding the trigger piece on is located underneath the applied rubber grip.
The Intromnia hilt design is a Saberbay exclusive, from my own custom design inspired from multiple other hilt designs seen in the SW universe.
Concept design was done in house at Saberbay, with additional concept rendering from Shadowfoil Props and final design renders and engineering from Jimmy's Saber Junk.
Please note this listing is for the hilt only, electronics and other parts required for install are not included. Installed pictures are for example only.
Full CNC machined hilt, made from polished and anodized aluminum pieces, as well as polished brass in various sections.
The hilt features 1" emitter, with a blade depth of 2.4" when fully installed.
Total length of the hilt is 11.5" with a weight of 22 oz. when fully installed.
The internal size allows for a fully removable chassis design, which can be purchased separately HERE
Hilt assembly is not required, the hilt will ship to you exactly as shown in the pictures.
For correct pommel assembly/disassembly for install purposes, please watch this helpful video from Jimmy's Saber Junk, video HERE
Aesthetic hilt features:
-high grade 6063 aluminum construction, CNC machined
-Matte black anodizing for the emitter shroud, and pommel fins
-polished brass material for emitter piece, pommel cap and midsection
-two spring loaded actuators, with shine through capability
-brass thumbscrew for blade retention
-red acrylic accent for added dexterity and grip
-rubberized grip mid section for comfortable holding
-polished aluminum for main body and pommel parts
-external crystal chamber in the pommel, capable of accent LED illumination
Special engineering features allow the pommel fins to be clocked to your desired position by loosening and retightening the middle brass section independently from the main body of the hilt.