3D printed chassis for the Korbanth OWK4(newest model, uses switch plungers instead of a switch PCB)
This is similar to our K4V2 design except the tactile switch PCB's are included in the chassis for the actuators to press down onto to.
Comes in two separate parts, a static upper piece that needs to be secured to the brass thin neck, this holds the ShtokCustomWorx blade side PCB, and is wired directly to the emitter NPXL connector.
Second part is the fully removable chassis which holds the choice of soundboard, removable 18650 battery, 28mm bass speaker, short pin NPXL connector(connects to blade side PCB), optional high amp killswitch and optional OLED screen.
Chassis features a channel for the switch PCB's to mount securely and also allow the actuators to slide past and lock in place, preventing the chassis from rotating.
Can be purchased as a standalone chassis kit with no electronics or as a DIY parts kit with all parts included(with or without the soundboard)
Also chassis kits will include the SCW switch PCB's and battery contacts.
Parts Kit w/ soundboard will include:
-3D printed chassis parts(main body, blade side PCB holder for thin neck, and shortpin holder for emitter), battery contacts, and switch PCB's
-18650 KeepPower 3000mah 15A button top battery
-28mm Saberbay X-Bass 4ohm/3W Speaker
-set of two un-assembled shortpin NPXL V3 connectors(one for the emitter and one for the chassis)
-high amp killswitch
-ShtokCustomWorx blade side PCB
Parts Kit WITH Soundboard include all parts listed above with board included.