Install chassis for the Saberbay Valor hilt. 3D printed in black PLA+ filament.
This chassis is meant to be a static chassis accessed by removing the grip section.
This chassis is meant to be used specifically with our 12mm Glass Eye Actuators, and either the SCW Tactile Switch or the pixel version.
-CFX, Proffie, GHV3 or Verso soundboard
-removable KeepPower 18650 battery (battery contacts provided with chassis, Option 3)
-SCW Tactile Switch PCB or SCW Pixl Switch PCB
-12mm Glass Eye Actuator
-22mm Veco bass speaker
When installing this chassis, it is recommended you install the speaker, battery contacts, and tactile switch first, then wire your preferred NPXL connector and holder into place in the emitter, and then pass the wires through the wire channel passage in the top part of the chassis. The chassis will need to be partially pressed into the emitter and your soundboard gets wired up last. After wiring you can secure your board in place with a press fit or use the cutout for a thin piece of crafting tape. Afterwards, fully insert the chassis into the hilt, it will be a snug fit and should line up with the switch actuator.
Sign up for email notifications
Subscribe to the mailing list to notifications for new products, upcoming sales and more!
