STL FILE 1.1” Install Chassis for Non-Removable Battery and Recharge Port PROFFIE
STL FILE 1.1” Install Chassis for Non-Removable Battery and Recharge Port PROFFIE
STL FILE 1.1” Install Chassis for Non-Removable Battery and Recharge Port PROFFIE
STL FILE 1.1” Install Chassis for Non-Removable Battery and Recharge Port PROFFIE
STL FILE 1.1” Install Chassis for Non-Removable Battery and Recharge Port PROFFIE

STL FILE 1.1” Install Chassis for Non-Removable Battery and Recharge Port PROFFIE

Regular price $7.00 Save $-7.00
/
Shipping calculated at checkout.

This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment. 

This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.

After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. 
The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.

1.1" 3D printed chassis for saber installs. 
Electronics not included, only shown in pictures.

Made to hold the following electronics:

-CFX, Proffie, GoldenHarvestV3 or Verso soundboards

-18650 battery, can be prewired or non prewired

-2.1mm Switchcraft Recharge Port, also allows space for a low profile killkey.

-28mm bass speaker

For recharge port wire management, the wires pass back to the speaker pod area and back through one of the two wire channels on the inside.