STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3
STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3
STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3
STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3
89Sabers K4 Kenobi Removable Chassis - Saberbay
STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3
STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3
STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3
STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3

STL FILE 89Sabers K4V2 Kenobi Removable Chassis GHV3

Regular price $25.00 Save $-25.00
/
Shipping calculated at checkout.

This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment. 

This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.

After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. 
The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.

3D printed removable chassis for the 89Sabers K4V2 Kenobi hilt.

This chassis is printed in two pieces, three if including the low profile NPXL V3 shortpin holder for the emitter.

Thin neck adapter part holds the blade side PCB(resistor not needed here). This part needs to press fit all the way up into the brass section of the thin neck.

Main chassis body holds the following parts:

-Soundboard(CFX, Proffie, GoldenHarvestV3)

-Removable KeepPower 18650 battery(high amp, button top required for neopixel)

-Removable battery contacts(provided with the chassis)

-OLED screen(optional, sold here at Saberbay)

-High amp killswitch(optional, but recommended, sold here at Saberbay)

-Switch PCB parts included with the hilt kit. This is intended only to be used with this specific part.

-28mm bass speaker(Saberbay X-Bass speaker recommended)

Please refer to your soundboard's manual for specific wiring diagrams and proper installation of your parts. Wire gauges of 22-24AWG are recommended for all positive and negative connections and 28-32AWG for all other wiring.

Chassis retention is required using one of the M3 screw holes underneath the clamp card area. M3 screw provided with the chassis kit. This is very important to use for proper function of the chassis especially to make sure the switch plungers line up properly. 

 

Customer Reviews

Based on 10 reviews Write a review