STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED
STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED

STL FILE Creepy Uncle DIY Chassis PROFFIE NO OLED

Regular price $20.00 Save $-20.00
/
Shipping calculated at checkout.

This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment. 

This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.

After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. 
The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.

Install chassis for the Creepy Uncle hilt made by Denis Lukyanov. Not intended for any other hilt design.

Chassis is made from three parts. A battery/speaker holder section, a main body section for the soundboard, wire channel for control box wiring, optional OLED screen, and NPXL V3 shortpin connector. Third piece is for the upper grenade section which holds the blade side PCB. 

Smallest required wire gauges are mandatory for this build. 30-32AWG wire for switches, speaker, accent LED's and OLED wiring are recommended. 22AWG for battery positive and negative wiring and 28AWG for data line. Please refer to your soundboard manual for proper wiring diagrams for required parts for installation.

Chassis parts list is as follows:

-CFX or Proffie or GoldenHarvestV3 soundboard

-Qty.2 NPXL V3 shortpin connectors, one for main body chassis and second for hilt emitter.

-18650 button top high amp battery

-battery contacts(included with all chassis sales)

-28mm bass speaker

-blade side PCB for grenade section chassis part

-ShtokCustomWorx smaller OD battery/speaker PCB set

Main body chassis is meant to be held in place by M3 set screw, which goes in underneath the control box main screw closest to the pommel, this prevents the main body from moving and stays in place. M3 set screw is included with the chassis.