STL FILE Korbanth Oppressor Double Crystal Chamber Install Chassis CFX
STL FILE Korbanth Oppressor Double Crystal Chamber Install Chassis CFX
STL FILE Korbanth Oppressor Double Crystal Chamber Install Chassis CFX

STL FILE Korbanth Oppressor Double Crystal Chamber Install Chassis CFX

Regular price $55.00 Save $-55.00
/
Shipping calculated at checkout.

This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment. 

This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.

After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. 
The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.

Board retention design is bespoke to Jimmy's Saber Junk and not to be replicated.

Double crystal chamber install chassis made specifically for the JSJ/Korbanth Oppressor staff hilt. Chassis design is made by Jimmy's Saber Junk. 3D printed in black PLA+ filament for physical chassis prints. 

To see the chassis in action, follow this link

Part 1: holds both soundboards, both speakers, both batteries, both killswitches, and optional mini LED strips

Part 2: for single crystal chamber, part of SCW Rotary Chassis PCB set, single crystal illuminated by single pixel accent LED, and optional motor and stabilizer(Part 5 and 6)

Part 3: Same as part 2, but for opposite end of the hilt

Part 4: Requires two of this same part, holds the tactile switches, NPXL shortpin connector, and other part of SCW Rotary Chassis PCB set

Part 5: optional part to hold motor for spinning crystal chamber(needs two per chassis)

Part 6: optional part for stabilizing the motor(needs two per chassis)

Total parts list:
-CFX, Proffie, or GHV3(requires two of each soundboard per staff install)
-Quantity of 2 KeepPower 18350 high amp battery, uses 18650 spring loaded battery contacts(Option 1 battery contacts provided with physical chassis prints)
-Quantity of 2 NPXL shortpin connectors
-Quantity of 2 SCW Rotary Chassis PCB sets
-Quantity of 4 1.5mm brass tactile switches(provided with physical chassis prints)
-Quantity of 2 22mm Veco bass speakers
-Quantity of 2 high amp killswitches
-Quantity of 2 single pixel accent LED"s for crystal chamber illumination(crystals not provided)
-optional mini WS2812 LED strips
-optional motor for spinning crystal chamber