This is an STL file for the chassis design specific for the listed saber in the description. Not intended for use for any other saber. After purchase, you will be sent an email with a ZIP file containing all required files for this chassis design. Please download the ZIP file to your desktop for proper use. This purchase is for a single use of this design on your personal saber, and unauthorized reuse or distribution of these files are strictly prohibited and will result in a permanent ban of your account and/or future purchases with Saberbay.
This is the install chassis for the Saberbay/Laredo Sabers 'Dark Matter' saberstaff. This is a 3D printed chassis printed in black PLA+ filament. The chassis is printed in two pieces. This is a static chassis that is fixed into the ends of the grip section, and are accessed by removing the emitters from each end and sliding them off the hilt." Parts requirements for this chassis(you will need to purchase some parts separately): -CFX or Proffie soundboard -2x NPXL shortpin hilt side connector(V3 or ECO version) -4x 1.5mm brass tactile switches(switches are provided with the chassis) -18650 removable battery(spring loaded contacts are provided with the chassis, Option 1) -high amp killswitch(optional) -22mm Veco 4ohm/3W bass speaker
Please note that the chassis has specific alignment requirements with the hilt, and you will notice there are holes near the base of the chassis pieces that line up with the retention screws provided with the hilt. You can add your own neopixel LED strips in the middle of the saberstaff to illuminate the grip section. Please refer to your soundboard's user manual for wiring diagrams and proper instructions.