This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment.
This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.
After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.
Install chassis for the Saberbay Petro hilt Available as empty chassis or parts package(board NOT included)
Empty chassis will include both chassis parts and battery contacts. Top half of chassis is held in place by larger set screw in the control box. It is recommended to install your V3 connector first, with enough wire leads to extend a few inches out the bottom, then wire the switches in place in the control box and pass the wires through the openings. Wire the chassis PCB last and press fit into the bottom. Bottom half of chassis holds the soundboard, battery, other chassis PCB(pins go on this side), and 28mm bass speaker.
Parts package includes; -3D printed chassis parts and battery contacts(option 3 in the store) -SCW rotary chassis PCB kit w/ pins -KeepPower 18650 3000mah 15A battery -Saberbay X-BASS 28mm 4ohm/3W speaker -V3 Long pin connector(Unassembled) -V3 ‘old style’ lens cover