This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment.
This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.
After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.
Fully removable install chassis designed for hilts with at least a 1" inner diameter, or 1.1" inner diameter for the grip section.
This is a DIY kit. All assembly and installation is the responsibility of the end user. Please refer to your soundboard's manual for proper wiring diagrams and applications.
For pre-installed options, please contact the store, but this is NOT a fully installed product.
Please read all instructions and details about this product below before purchasing. These chassis products are made to order and not eligible for returns or replacements due to wrong products or sizes being ordered that may or may not fit your saber hilt.
At least a 1" inner diameter all the way through. Thin neck sabers or sabers that narrow to a less than 1" inner diameter will not work. Your hilt must also be able to use some kind of switch plunger or actuator to press down onto the tactile switch PCB's built into the chassis. There are several switch plunger or actuator options here on the page, or you can use your own or another third party. Also requires a retention screw somewhere in the general vicinity above the switch area. This is used for chassis retention and proper alignment. Most hilts will have one for the heatsink or neopixel holder but if you do not have one, you can always drill and tap your own.
PRODUCT DESCRIPTION AND PARTS INCLUDED:
Total chassis length is 7 5/16" in length. Please ensure you have adequate space for the chassis in your hilt. This length does not include the speaker.
1" chassis version is 1" in outer diameter all the way throughout the chassis. 1.1" chassis version is 1.1" in the speaker area only, the rest of the chassis is 1".