STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE
STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE

STL FILE Korbanth Katarn V2 Crystal Chamber Install Chassis 'Twist and Click' PROFFIE

Regular price $40.00 Save $-40.00
/
Shipping calculated at checkout.

This is a digital file download for the STL file of this chassis, this is not a physical product and you are responsible for your own 3D printing. Saberbay is not liable for user printer issues or malfunction of equipment. 

This purchase is for a one time use of this product. This STL file is the intellectual property of Saberbay and not intended for unauthorized resale or distribution of these files. If you need to use the file again for an additional use(outside of needing to reprint due to a chassis break or other error), you will need to purchase the files again to be authorized to use them.

After purchase you will receive a one time digital download for this product, please do not click on the download link until you are able to use it. 
The download will be good for 24 hours after purchase. I will not reissue files for improper downloading or time expiration.

3D printed install chassis for the Korbanth Katarn V2. Designed by Jimmy's Saber Junk.

Printed in 4 separate parts for the chassis. Upper emitter section, which holds the NPXL connector, and bottom pin side PCB for the Rotary Chassis PCB set. Main body which holds the board, battery, killswitch and flat PCB side for the Rotary Chassis PCB set.
Crystal chamber part which holds a crystal, pixel accent, OLED screen and 28mm bass speaker. 4th piece is for the tactile switches provided with the hilt.

-Proffie or GHV3.
-Rotary Chassis PCB set (may require light filing around edges to fit if rough)
-NPXL V3 short pin connector
-28mm bass speaker
-KR Sabers 128x32 OLED screen
-Spring loaded battery tabs.(included with physical prints, option 1 in the store)
-removable 18650 battery
-A crystal and single neo pixel accent LED
-High amp kill switch.
Designed to use the tactile switches that come with the hilt.

Board retention design is bespoke to Jimmy's Saber Junk and not to be replicated.
The twist n click chassis design and mechanism is bespoke to Jimmy's Saber Junk and not to be replicated on any level.