GeonObi Install Chassis
GeonObi Install Chassis
GeonObi Install Chassis
GeonObi Install Chassis
GeonObi Install Chassis
GeonObi Install Chassis
GeonObi Install Chassis

GeonObi Install Chassis

Regular price$24.00
/
Shipping calculated at checkout.
No reviews

Soundboard
Chassis Section
Full Parts Kit

Install chassis for the Saberbay/Laredo Sabers GeonObi hilt. Not compatible with any other hilt design.
This is 3D printed in two parts.

Chassis design features a fully removable design that allows easy access to the soundboard and removable battery once fully installed.
The bottom half slides out from the pommel and is reinserted the same way.
The top half is inserted from the top end below the emitter section, and used to keep the red actuators upright and aligned with the hilt. Top half is held in place after installation by screwing back on the hilt emitter.
Parts list required for install:
-CFX, Proffie, GHV3, or Verso soundboard
-NPXL shortpin hiltside connector (V3 or ECO)
-6 trace Rotary Chassis PCB set
-Two 6x6x4.3 tactile switches(INCLUDED)
-removable 18650 battery(spring loaded battery contacts included)
-high amp killswitch(optional, recommended)
-28mm bass speaker

Full Parts Package includes:
-choice of sounboard (CFX, ProffieV3.9 or GHV3)
-assembled NPXL V3 shortpin hiltside connector
-6 Trace Rotary Chassis unassembled PCB set
-removable KeepPower 18650 3000mah 15A battery
-high amp killswitch
-28mm X-BASS 4ohm/3W speaker

Pictures of installed electronics are for reference only.

You may also like