Intromnia V2 Install Chassis

Intromnia V2 Install Chassis

Regular price$243.00
/
Shipping calculated at checkout.

Soundboard
Switch Option
Full Parts Kit

Install chassis designed by JSJ for the Intromnia V2. This design is similar to the V1 design but with the option of a relocated OLED screen to be used congruently with the open control box on the hilt. This chassis is not intended to be used with any other hilt designs.
Comes in two parts, a main body and a pommel section that goes over the speaker and is used for holding the single pixel accent LED and the long crystal.

The chassis is somewhat static in the hilt, needing to go into the pommel area of the hilt and being sandwiched inbetween the Kylo-style pommel pieces and the copper external chamber piece.

Parts list for install:
-CFX or Proffie
-NPXL V3 shortpin hiltside connector (or equivalent)
-qty.2 ShtokCustomWorx tactile switch PCB's (either pixel or non pixel, included with the chassis print depending on the option chosen)
-removable 18650 button top battery (spring loaded Option 1 contacts used)
-high amp killswitch
-OLED screen (optional)
-28mm speaker
-single pixel accent LED
-long crystal (resin printed crystal included with chassis print)

FULL PARTS KIT includes:
-choice of CFX or Proffieboard V3.9
-NPXL V3 assembled shortpin hiltside connector
-qty.2 SCW tactile switches (pixel or nonpixel)
-removable KeepPower 18650 3000mah 15A protected cell
-high amp killswitch
-blue OLED screen(for OLED option kit)
-28mm X-BASS 4ohm/3W bass speaker
-single pixel accent LED

You may also like