Intromnia

Install chassis for the Saberbay Intromnia hilt. This chassis is designed specifically for this hilt and not compatible with other hilt designs. 
The chassis is 3D printed in two parts in black PLA+ filament.
Each chassis will include the removable battery contacts, and tactile switches required for install. Please note that the tactile switches come in two versions, one with neopixel accent LED's and one without; empty chassis kits will include NONPIXEL switches and full parts chassis kits will include PIXEL switches.

This is a removable chassis design that, when completed, will stay affixed into the pommel of the hilt. Please watch this helpful instructional video from Jimmy's Saber Junk for some instructions on how to assemble this part. Video link here

Chassis design can be ordered in multiple variations. Please read the descriptions carefully and make sure you are buying the correct version you want to use.
-CFX, Proffie, GHV3, and Verso soundboards
-Removable 18650 or 21700 sized battery(uses provided spring loaded contacts)
-SCW Tactile Switch PCB (Pixel or non Pixel version)
-NPXL shortpin connector (V3 or Eco)
-High amp killswitch
-28mm bass speaker
-KR Sabers/TCSS OLED optional add on
-BTF Accent Pixel LED for crystal chamber
-Resin printed long or short crystal(or you can use your own)

When wiring up your chassis it is recommended to wire up your speaker first. The secondary piece of the chassis will hold your pixel accent LED, which will need to be wired up and secured to the resin printed crystal and affixed to the bottom of that chassis part. The accent LED wiring will need to pass through the open wire channel and underneath the speaker to run the wires through to your soundboard. Secure that part to the main body using E6000. The rest of the install can be done as you see fit.

Full install kits can be ordered to include all required parts electronics for your install.
Each chassis install kit will include:
-Choice of soundboard
-3D printed chassis(battery contacts included)
-Choice of battery size (18650 or 21700)
-One NPXL V3 assembled hilt side connector
-Two SCW PXL tactile switches(Neopixel version)
-One high amp killswitch
-One 28mm bass speaker
-KR Sabers OLED if OLED option is chosen(note that OLED's are not available for 21700 battery versions)
-One BTF neopixel accent LED
-One resin printed crystal 

You will need your own tools and wiring to do this build, please refer to your soundboard's manual for wiring schematics and proper instructions.
Proffie board versions will include our preconfigured soundboards. Users are responsible for their own editing and configuration changes.
CFX boards will not be preconfigured and will need the user to download their own configuration files.
GHV3 and Verso soundboard will have factory default settings and configurations.

The 'Dark' edition of the Intromnia hilt.
This version also includes a 3D printed control box which replaces the red trigger faux switch normally on the hilt. The red trigger will still be included with the hilt as a separate accessory.

The slot for the clamp card section can accommodate up to a 49mm x 15mm x 1mm sized clamp card. In the example pictures, I am using a Creepy Uncle clamp card. 

For this version, the control box will be included not attached on the hilt. You must do yourself with E6000 and also apply the rubber grip on yourself.
This is because if you change your mind and use the red trigger instead, the access point to the screws holding the trigger piece on is located underneath the applied rubber grip.

The Intromnia hilt design is a Saberbay exclusive, from my own custom design inspired from multiple other hilt designs seen in the SW universe.
Concept design was done in house at Saberbay, with additional concept rendering from Shadowfoil Props and final design renders and engineering from Jimmy's Saber Junk.

Please note this listing is for the hilt only, electronics and other parts required for install are not included. Installed pictures are for example only. 

Full CNC machined hilt, made from polished and anodized aluminum pieces, as well as polished brass in various sections.
The hilt features 1" emitter, with a blade depth of 2.4" when fully installed.
Total length of the hilt is 11.5" with a weight of 22 oz. when fully installed.
The internal size allows for a fully removable chassis design, which can be purchased separately HERE  
Hilt assembly is not required, the hilt will ship to you exactly as shown in the pictures.
For correct pommel assembly/disassembly for install purposes, please watch this helpful video from Jimmy's Saber Junk, video HERE

Aesthetic hilt features:
-high grade 6063 aluminum construction, CNC machined
-Matte black anodizing for the emitter shroud, and pommel fins
-polished brass material for emitter piece, pommel cap and midsection
-two spring loaded actuators, with shine through capability
-brass thumbscrew for blade retention
-red acrylic accent for added dexterity and grip
-rubberized grip mid section for comfortable holding
-polished aluminum for main body and pommel parts
-external crystal chamber in the pommel, capable of accent LED illumination

Special engineering features allow the pommel fins to be clocked to your desired position by loosening and retightening the middle brass section independently from the main body of the hilt.

Fully Installed Intromnia hilt with custom weathering. This features a 3D printed control box with clamp card to replace the red trigger.

Please read all details and information in the listing before purchasing

This is a fully installed saber with CFX. The chassis is removable when unscrewing the pommel area as shown, it stays affixed in this section. Please do not try to remove the chassis from this part of the hilt(the pommel).

When reinserting the chassis you will need to mind the alignment of the tactile switches with the hilt switch actuators. You can adjust the clocking of the chassis alignment by alternating the brass piece’s alignment with the pommel, using the fins as a visual guide.

Full parts details below:

-CFX soundboard, Neopixel with newest firmware

-NPXL V3 Shortpin hiltside connector 

-two button configuration using SCW Tactile Switch PCB’s, with blade matching pixel accent LED’s (top for main, bottom for auxiliary)

-high amp killswitch

-removable 21700 KeepPower protected battery, 15A 5000mah, with custom battery wrap

-28mm X-BASS 4ohm/3W speaker

-crystal chamber illumination with independently wired pixel accent LED(can be programmed by end user’s own configuration)

This listing is for the installed saber only, there are no other parts included that are not mentioned in this listing description

The 'Dark' edition of the Intromnia hilt.
The Intromnia hilt design is a Saberbay exclusive, from my own custom design inspired from multiple other hilt designs seen in the SW universe.
Concept design was done in house at Saberbay, with additional concept rendering from Shadowfoil Props and final design renders and engineering from Jimmy's Saber Junk.

Please note this listing is for the hilt only, electronics and other parts required for install are not included. Installed pictures are for example only. 

Full CNC machined hilt, made from polished and anodized aluminum pieces, as well as polished brass in various sections.
The hilt features 1" emitter, with a blade depth of 2.4" when fully installed.
Total length of the hilt is 11.5" with a weight of 22 oz. when fully installed.
The internal size allows for a fully removable chassis design, which can be purchased separately HERE  
Hilt assembly is not required, the hilt will ship to you exactly as shown in the pictures.
For correct pommel assembly/disassembly for install purposes, please watch this helpful video from Jimmy's Saber Junk, video HERE

Aesthetic hilt features:
-high grade 6063 aluminum construction, CNC machined
-Matte black anodizing for the emitter shroud, and pommel fins
-polished brass material for emitter piece, pommel cap and midsection
-two spring loaded actuators, with shine through capability
-brass thumbscrew for blade retention
-red acrylic accent for added dexterity and grip
-rubberized grip mid section for comfortable holding
-polished aluminum for main body and pommel parts
-external crystal chamber in the pommel, capable of accent LED illumination

Special engineering features allow the pommel fins to be clocked to your desired position by loosening and retightening the middle brass section independently from the main body of the hilt.

3D printed stand for the Saberbay Intromnia Hilt. Printed in black PLA+ filament. Not designed for any other hilt.
Contours to the specific shape of the saber design to allow the saber to comfortably sit upright on display.
This listing does not include the saber itself, and pictures are only used for example purposes.