Blade Plugs

1" custom blade plugs for standard or neopixel sabers. Available in silver and gold finish options, as well as a standard nonlit version for baselit inhilt LED sabers and neopixel version for neopixel setups.
Blade plug measures 25.4mm in outer diameter with an inner diameter of 21mm.
The height of the standard plug is 51mm(not including the stem height), and the neopixel version is 56mm tall.
Neopixel versions will include the standard plug with a NPXL Blade Side PCB LED connector with a 3D printed holder.

*These are B-Grade versions, with cosmetic imperfections in the top parts of the blade plug*

Our newest custom blade plug design, is an Aperture Style design with a functioning open and closing mechanism, like a camera shutter. Check out the video example to see these in action.
These can rotate clockwise to close, and counter clockwise to open yourself, these are not self actuating.
These are 25.4mm (1") sized blade plugs, so make sure your saber can accommodate 1" blades and blade plugs before purchasing.
The total height of the blade plugs is 45mm from top to bottom, and 49.5mm with the neopixel connector added. The inner diameter of the polycarbonate part of the plug is 20mm.
These are made with very small M1x3mm phillips head screws, 6 on top and 6 underneath, so please do not lose these screws as they are very small and can be easily lost or misplaced.
The assembled blade plug will feel somewhat loose when you receive it; this is normal to allow the pieces to actuate and move back and forth. You can tighten the set screws if you wish but this will prevent it from rotating back and forth if they are tightened too much.

These can be ordered as a standard or neopixel blade plug.
The standard plug will include only the blade plug itself, and the neopixel blade plug will be assembled with a custom 3D printed holder and one of our ShtokCustomWorx Blade Side PCB's with built in neopixel LED's.

Our newest custom blade plug design, is an Aperture Style design with a functioning open and closing mechanism, like a camera shutter. Check out the video example to see these in action.
These can rotate clockwise to close, and counter clockwise to open yourself, these are not self actuating.
These are 25.4mm (1") sized blade plugs, so make sure your saber can accommodate 1" blades and blade plugs before purchasing.
The total height of the blade plugs is 45mm from top to bottom, and 49.5mm with the neopixel connector added. The inner diameter of the polycarbonate part of the plug is 20mm.
These are made with very small M1x3mm phillips head screws, 6 on top and 6 underneath, so please do not lose these screws as they are very small and can be easily lost or misplaced.
The assembled blade plug will feel somewhat loose when you receive it; this is normal to allow the pieces to actuate and move back and forth. You can tighten the set screws if you wish but this will prevent it from rotating back and forth if they are tightened too much.

These can be ordered as a standard or neopixel blade plug.
The standard plug will include only the blade plug itself, and the neopixel blade plug will be assembled with a custom 3D printed holder and one of our ShtokCustomWorx Blade Side PCB's with built in neopixel LED's.

BUYER DISCRETION: This product uses ShtokCustomWorx blade side PCB connectors. 
While the blade side PCB is a fantastic product, it is not compatible with certain LGT/SaberStudio sabers that use their own SaberStudio hilt side neopixel pin connector.
Some of their connectors use two separate pins for the data line, which will not line up with the blade side PCB used on this product. You will either need to upgrade your saber with a compatible connector, such as the NPXL V3, or use it with a saber that utilizes a different neopixel hilt side connector.

7/8” blade plug

Make any saber with 7/8” blade holder looker even cooler on display

No custom heights, these are pre built

These are modular and unscrew in the middle
The comes standard 36mm tall
Unscrewing the bottom half makes
It 17mm tall

The NeoPixel Version is 41mm tall(due to adding the NPXL blade side pcb and Custom pcb holder)

**As with all blades or blade plugs these may require light sanding for desired fit since most blade holders on hilts are not exactly the same, which is done by holding with sand paper and twisting the plug for an even material removal **

1” blade plug made by Force Ghost sabers

Made from trans white polycarbonate tube for the base material and silver metallic painted resin for the spikes. Resin is delicate so please handle with caution 

Length of polycarbonate is 31.5mm and overall length with spikes is 52mm

Wall thickness is 1.5mm