Saber Add Ons

Blade adapter to use 7/8” blades in 1” emitters

Item is 3D printed from black PLA + filament

Adapter is 1.5” tall, and has a cutout channel to allow a retention screw to get to the blade

Some sanding may be required depending on the tolerance of your emitter

Will work for regular blades as well as neopixel blades

Designed and produced by Shadowfoil Props!

These are lead and nickel free zinc-alloy cast coins painstakingly recreated from stills from the Book of Boba Fett and images of screen used credits. We believe these to be the most accurate version of these coins currently available.

The smaller circular design measures 35mm in diameter and 4mm thick and is finished in antiqued gold color.

The larger partially rectangular design measures 45mm in diameter (diameter of center circular portion) and 4mm thick and is finished in antiqued silver color.

3D printed decorative replacements for removable 18650 batteries when not in use. 
These are printed in black PLA + filament. 
Three different designs to choose from: Vial, Gear, and Chamber
Please note that the pictures are examples of painted pieces and do not come standard with these items. You can add a painted option in either Antique Gold or Copper paint finish.
The Vial option is shown in Antique Gold, the Gear option is shown in Copper, the Chamber option comes in two parts and threads open at the bottom to allow a crystal to be added(crystal is not included).

Great quality covertech belt clip for sabers featuring a covertech wheel.
These are made from machined aluminum in a smooth matte black anodized finish.
Easily slides over your belt and can use either a covertech wheel or a ring attachment.

The thickness of the material that slides inbetween the covertech wheel on your saber is approximately 2.2mm thick. So please doublecheck your covertech wheel first prior to purchasing to confirm this will be compatible.

D ring for the Master Sentinel 

Basic dimensions: 38mm ID, 42mm OD

Grip sleeve for the Master Sentinel 

Basic dimensions: 31.8mm ID, 35.5mm OD, length of 93.5mm

This is a standard covertech wheel that can be added on to your saber.
Included is one matte black anodized aluminum covertech wheel and one screw.
The covertech wheel measures 18.4mm in diameter with an inner slot of 2mm for covertech clips.
The included screw is a black allen head M3x5mm

This is a covertech wheel attachment for the Survivor hilt. 
The small kit comes with:
-anodized black aluminum machined covertech wheel
-replacement aluminum bar with goes in place of one of the plates that cover the 3 screws on one side
-two slotted M3 screws
-one allen head M3 screw (black)

The covertech wheel itself is 18.4mm wide, with a 2mm inner slot for covertech clips.

To install this covertech, simply replace the standard small plate that comes with the Survivor hilt with the aluminum one provided with this assembly.
Thread in the two slotted screws on the outer holes, which should sit flush.
Thread in the black allen head screw over the covertech wheel.