Valor

Our newest entry line DIY hilt, the Valor!
Made from CNC machined 6061 aluminum, this hilt features a polished finish and is ready for your customization. 
Main design features of this hilt include a removable one piece shroud, single 12mm switch hole support, (which can support a variety of our 12mm sized products), diamond knurling on top and bottom of the grip section, a hidden sound venting system, and ample internal space for 1" blades and up to 28mm speakers.

Shroud design allows for hidden blade retention methods, utilizing one of the shroud screws as a blade retention. Each hilt will include the correct number of flat head allen screws to sit flush with the shroud. 
The emitter also features shine through holes around the entire upper section.
The hilt separates into several pieces, with a detachable grip and pommel section to allow easy chassis installation options. Chassis retention can be used by the optional M2 threaded hole at the bottom of the emitter piece above the threads. 
The pommel has hidden sound venting which is concealed by the pommel insert.

This will include the empty saber only, no other parts or electronics are included.

Total weight of the empty hilt is 5 ounces, with a total length of 10 5/8" from top of the shroud to the bottom of the pommel.

Install chassis for the Saberbay Valor hilt. 3D printed in black PLA+ filament.
This chassis is meant to be a static chassis accessed by removing the grip section.
This chassis is meant to be used specifically with our 12mm Glass Eye Actuators, and either the SCW Tactile Switch or the pixel version.
-CFX, Proffie, GHV3 or Verso soundboard
-removable KeepPower 18650 battery (battery contacts provided with chassis, Option 3)
-SCW Tactile Switch PCB or SCW Pixl Switch PCB
-12mm Glass Eye Actuator
-22mm Veco bass speaker

When installing this chassis, it is recommended you install the speaker, battery contacts, and tactile switch first, then wire your preferred NPXL connector and holder into place in the emitter, and then pass the wires through the wire channel passage in the top part of the chassis. The chassis will need to be partially pressed into the emitter and your soundboard gets wired up last. After wiring you can secure your board in place with a press fit or use the cutout for a thin piece of crafting tape. Afterwards, fully insert the chassis into the hilt, it will be a snug fit and should line up with the switch actuator.

The new Saberbay Valor chassis from Jimmy's Saber Junk. This is a 3D printed two part chassis printed in black PLA+ filament. Please read the full description of this listing to ensure you order the correct chassis and appropriate parts.
The Twist N' Click feature and board retention design are bespoke to Jimmy's Saber Junk and not to be replicated. 
Twist N' Click chassis retention allows the chassis to be retained and secured with a simple twisting motion of the chassis, which keeps it secured in place without the need for any retention screws.
This chassis features many different options for extra add ons and different switch setups.
The top part of the chassis can be ordered for two different switches.
The NON-ILLUMINATED SWITCH version uses a 1.5mm brass tactile switch, and is meant to be used with our standard 12mm knurled actuators, example here.
The ILLUMINATED SWITCH version uses our SCW PIXL Tactile Switch, example here.
Make sure you order the correct version for the switch you plan to use.

The bottom part of the chassis can be ordered for various soundboards, as well as OLED screen and SCW Bluetooth Module add ons for the supporting soundboards with those capabilities.

Full list of required parts and components:
-CFX, Proffie, GoldenHarvestV3, or Verso soundboard
-NPLX shortpin hilt side connector(V3 or ECO)
-spring loaded 18650 KeepPower battery
-28mm X-Bass Speaker (4ohm/3W or 8ohm/3W)
-High amp killswitch
-SCW Rotary Chassis PCB set
-OLED screen
-SCW Bluetooth Module
-1.5mm brass tactile switch OR SCW PIXL Tactile Switch PCB
-12mm Knurled Switch Actuator(if using the NON ILLUMINATED), or 12mm Knurled Glass Eye Switch Actuator(if using the ILLUMINATED)