-All same parts as above but minus the soundboard for the desired chassis type.
Please note that is a DIY kit only, you are responsible for all self installation of parts and we are not liable for any user error or mishandling of components. Please refer to your preferred soundboard's manual for proper wiring schematics.
NPXL ECO Longpin Connector Set for 1” and 7/8” *New Universal Style*
3D lightsaber saber vertical stand. Made from black PLA + material. Simple and sturdy, these stands will hold most sabers on the market no matter the shape of the pommel Depending on the size and weight of your saber, stand may have a slight bend with the saber resting against it
Stand dimensions are approximately 7” tall and 2” wide
Base cutout can hold a width up to 1 and 5/8” in outer diameter
THIS IS A SEND IN SERVICE You must provide the hilt to be installed with the specs outlined below. Customer is responsible for their own shipping costs to send in the hilt. Please make sure the hilt is securely packaged and safe to travel. We are not liable for any damage occurred to the hilt in transit to us. The hilt must be the 89Sabers Obi Wan TPM hilt version only. Any saber sent in that is not the correct version will need to be sent back and buyer is responsible for return shipping.
Send in service price includes full install and return shipping for US customers. Send in services can not use any customer provided chassis or parts.
After purchase please send your hilt to this address and make sure to include your name, and order number in the box with your hilt:
3528 Crescent Meadow Dr.
Bakersfield, CA 93308
Installed 89Sabers Obi Wan TPM hilt. This has been installed with the following electronics.
-Saberbay Obi TPM Chassis kit
-Crystal Focus X soundboard from Plecter Labs(preloaded with over 25 sound fonts)
-NPXL V3 connector and lens cover
-Two button setup(Red for main and Brass for auxiliary)
-Blue OLED screen built into chassis
-Removable 18650 KeepPower 3000mah 15A battery
-KR Sabers 22mm speaker
This hilt takes a 1" blade(not included, we recommend our 1" blades for this hilt as the emitter is a tighter fit) Sale includes the fully installed hilt, blade plug, collectors box from 89Sabers, and extra accesories included with the original kit(extra pommel cubes)
Please refer to the soundboard manual for full list of features and functions and how to use the board.
All installed sabers are covered by a 30 day warranty. Any user error or misuse or tampering with the electronics outside of their intended use is not covered. Please ask any questions you may have before purchasing.
Bulgin Pin set for Goth3D chassis designs. Can also be incorporated into your own custom designs. Rated for 10A each, can hold up to 18AWG wire per pin. Each set includes one male and one female connection.
NPXL ECO Longpin Connector Set for 1” and 7/8” *Older Style*
Designed specifically for the Blind Knight hilt from Solo's Hold Made to hold the following parts: -CFX or Proffie, please select correct version for your board; soundboard(can be installed USB or SD card side up, board not included)
-Removable 18650 battery(not included)
-ShtokCustomWorx NPXL connector(short pins recommended, not included)
-28mm bass speaker(not included)
-brass tactile switches 2.5mm height(included)
-3mm accent leds(not included)
Chassis print also includes speaker attachment to protect the speaker when pushing in the chassis from the bottom. Recommended to use a secure adhesive such as E6000 and allow to fully cure before using, do not use this piece to pull the chassis out.
Gently press the top of the PCB to push out the chassis from the top. Dry fit your chassis into your hilt before installation to make sure it will slide out easily. Some sanding may be required.
Chassis parts for install use on a Korbanth Rogue Master
Chassis comes in 3 pieces
Main chassis body, speaker pod, and Neopixel connector and accent led holder
Chassis is designed for the following components
Neopixel PCB-Shtok short pin
Killswitch-provided with chassis
Battery contacts-provided with chassis
Speaker-28mm bass speaker
Speaker pod connectors-provided with chassis
Install notes: 30-32awg recommended for all components except for battery/power connections
22-24AWG recommended for battery/power
Chassis will come 3D printed in black PLA+ filament
Chassis is held in place by set screws in the hilt
PCB holder has an optional hole for an accent led underneath the red jewel bezel of the hilt, sanding of the top of the 3mm accent led is required once it is inserted into the part. Some sanding is required of the Shtok PCB to press fit into the holder
I recommend wiring to the front of the battery contacts when soldering your connections
Chassis include the 3 printed parts, battery contacts, speaker pod connectors, and the killswitch for install
ECO NPXL Connector with presoldered pins and presoldered wire leads. Wire is high temp PTFE wire from Powerwerx, a top tier supplier of high quality wire. Each wire is 12” long. 24AWG wire is used for positive and negative wires and 28AWG wire is used for the data line wire. Red wire-positive leads White wire-negative leads Green wire-data line
Please refer to your soundboard manual for proper wiring and installation to your board. All connectors are tested prior to being assembled.
Install chassis for the Saberbay Petro hilt Available as empty chassis or parts package(board NOT included)
Empty chassis will include both chassis parts and battery contacts. Top half of chassis is held in place by larger set screw in the control box. It is recommended to install your V3 connector first, with enough wire leads to extend a few inches out the bottom, then wire the switches in place in the control box and pass the wires through the openings. Wire the chassis PCB last and press fit into the bottom. Bottom half of chassis holds the soundboard, battery, other chassis PCB(pins go on this side), and 28mm bass speaker.
Parts package includes; -3D printed chassis parts and battery contacts -rotary chassis PCB kit w/ pins -KeepPower 18650 3000mah 15A battery -KR Sabers 28mm 8ohm/2W bass speaker -V3 Long pin connector(Unassembled) -V3 ‘old style’ lens cover
This is a high quality cell that will work in the chassis we offer here for 21700 in hilt recharge port.
It will work with Neo Pixel but will not perform as well with mixed color as the cell drains.
The other model we offer that is 4000mAh will before better with mixed colors but the run time will be a shorter.
Both are great options with their own advantages.
We recommend this 5000mAh for in hilt led models.
● Model: P2150R
● Nominal Capacity: 5000mAh
● Minimum Capacity: 4900mAh
● Nominal Voltage: 3.7V
● Charging Method: CC-CV
● Standard Charging Current: 2500mA
● Standard Charging Time: 180min.
● Continuous Maximum Discharge Current: 15A
● In Built Safety Circuitry
● Protection Circuit (Against over charge, over discharge, over current and short-circuit.)
● 4.20V maximum voltage and 2.50V cut-off voltage
● Over 500 charge-discharge cycles
● Weight: 70.0g
● Maximum Dimensions: (D)21.6*(L)74.5mm
Charge: +10 to +45° C
Discharge: -20 to +60° C
Storage: 0 to +25° C