Machina Crystal Chamber Install Chassis DIY Kit

3D printed crystal chamber chassis design for the Saberbay Machina hilt, not intended for any other hilt design. This comes printed in six total parts; a fully removable main chassis, an emitter piece for the hiltside connector and pin side of the thin neck PCB set, a speaker cap/cover, a chamber for crystal display, and an optional soundboard cover

Parts list for install:
-CFX, Proffie (GHV4 coming soon)
-shortpin hiltside neopixel connector (NPXL V4 or ECO)
-qty.2 1.5mm brass tactile switches(included with chassis print)
-removable protected button top 18650 battery (Option 2 battery contacts included with chassis print)
-high amp killswitch
-thin neck PCB connector set
-28mm bass speaker
-qty.2 WS2812 mini LED strips 10 LED count, or WS2812C-2020 15 LED count
-qty.2 Micro pixels (for crystal chamber illumination) 
-1.5mm brass or steel rod (total of 4 separate rods cut at least 53mm in length)
-4mm OD 3mm ID tube (total of 2 separate tubes cut at least 40mm in length)