89Sabers K4/OWK4/Ben Kenobi Install DIY Chassis
89Sabers K4/OWK4/Ben Kenobi Install DIY Chassis
89Sabers K4/OWK4/Ben Kenobi Install DIY Chassis
89Sabers K4/OWK4/Ben Kenobi Install DIY Chassis
89Sabers K4/OWK4/Ben Kenobi Install DIY Chassis
89Sabers K4/OWK4/Ben Kenobi Install DIY Chassis

89Sabers K4/OWK4/Ben Kenobi Install DIY Chassis

Regular price$20.00
/
Shipping calculated at checkout.
No reviews

Soundboard
Full Parts Kit

3D printed chassis for the 89Sabers Ben Kenobi hilt, or newest version of their OWK ANH saber. Please note this is slightly different than the older k4V2/OWK4 design, as the chassis is slightly shorter at the speaker area because of a new pommel design change.

Comes in two separate parts, a static upper piece that needs to be secured to the brass thin neck, this holds the ShtokCustomWorx blade side PCB, and is wired directly to the emitter NPXL connector. 

Second part is the fully removable chassis which holds the choice of soundboard, removable 18650 battery, 28mm bass speaker, short pin NPXL connector(connects to blade side PCB), optional high amp killswitch and optional OLED screen. 

Chassis features a channel for the switch PCB's to mount securely and also allow the actuators to slide past and lock in place, preventing the chassis from rotating.

Also chassis kits will include the SCW switch PCB's and battery contacts.

Parts list for install:
-CFX, Proffie, GHV3, Verso
-2x NPXL shortpin hilt side connectors
-ShtokCustomWorx blade side PCB
-two tactile switch PCB's (included with chassis print)
-removable 18650 battery (option 3 battery contacts included with chassis print)
-OLED screen
-high amp killswitch
-28mm bass speaker

FULL PARTS KIT includes:
-choice of soundboard (CFX, ProffieV3.9 or GHV3)
-qty.2 assembled NPXL V3 shortpin hiltside connectors
-qty.1 Blade Side PCB
-qty.1 KeepPower 18650 3000mah 15A button top protected cell
-qty.1 blue TCSS OLED screen
-qty.1 high amp killswitch
-qty.1 28mm X-BASS 4ohm/3W bass speaker

 

You may also like