Revanted

Now available in an ECO version printed in high strength and durability PLA+ filament. Please read the full description of the listing before purchasing.

Chassis dimensions are 28mmx110mm and 25.4mmx23mm with a total length of 133mm. If using this chassis for a hilt other than the Revanted please make sure you measure the inner dimensions of the hilt you plan on using this for to ensure it will fit. 

Due to the tolerance of 3D printing, some parts may require some sanding or be a tight fit. Please make sure all of your desired install parts will fit before starting the install.

Chassis for the "Revanted" hilts made by ShtokCustomWorx and Warsabers.

Works with other similar diameter hilts like from SaberForge.

Features:

* CFX, Proffieboard, Verso, GHv3 boards support (choose a dedicated chassis version)

* kill switch

* removable Protected 18650 battery

* 28mm bass speaker

* USB-C port for board Data access and battery charging

* Li-Ion 4.2V battery charging board (like TC4056) + aluminum heat sink support

* charging status LED hole (3mm round dual color accent LED inserted from the inside)

* FSC-BT909 bluetooth module support

Other parts you need for this chassis:

* High power Kill Switch

* TC4056 Li-Ion battery charging pcb (optional)

* 28mm bass speaker

* USB-C port (optional)

* Sound board

* 20-22AWG, 24AWG, 28AWG and 30-32AWG wires

* Positive and Negative battery terminals(supplied with chassis purchase)

Crystal chamber install chassis for the Revanted hilt from WarSabers/ShtokCustomWorx
Chassis is designed by Jimmy's Saber Junk. Board retention design is not to be replicated.
This is 3D printed in black PLA + filament. Printed in three parts; one for the main body, one for the crystal chamber, and one for the emitter PCB holder.
Fits a crystal(not provided) and single pixel accent. Crystal chamber color is for reference only, you will need to paint yours your preferred color.

Holds the following electronics:
-Proffie or GoldenHarvestV3 soundboard
-removable 18650 battery using spring loaded contacts(provided with the chassis, option 1 in the store)
-28mm bass speaker
-high amp killswitch
-NPXL V3 longpin connector for the emitter PCB holder

Install chassis for the Revanted hilt from WarSabers/ShtokCustomWorx
Chassis is designed by Jimmy's Saber Junk. Board retention design is not to be replicated.
This is 3D printed in black PLA + filament. Printed in two parts; one for the main body and one for the emitter PCB holder.
Holds the following electronics:
-Proffie, GoldenHarvestV3 or Verso soundboard
-removable 18650 battery using spring loaded contacts(provided with the chassis, option 1 in the store)
-28mm bass speaker
-high amp killswitch
-NPXL V3 longpin connector for the emitter PCB holder