Basic 3D printed install chassis for the KR Fortis hilt; not compatible with any other saber design.
This is offered as a DIY chassis for your own self installation, or for the installation by a third party, it does not come with any electronics pre-installed. Any images shown in this listing with installed electronics are for example purposes only.
Please make sure to read full listing description before purchasing.
This chassis design is a semi-removable design, with the longer main body accessible in and out through the pommel. The top section of the chassis is meant to stay inside the hilt, held in place by the two button plungers as well as the brass retention screw, it is inserted through the top of the hilt (remove the button plungers first to help align the switches)
The main body has a helpful alignment guide that matches a cutout on the top piece of the chassis, this helps make sure the chassis PCB stays properly aligned.
The smallest part can be used as a speaker cover for the 22mm speaker option but it is an optional piece.
Parts list for install:
-CFX, Proffie, or GHV3 soundboard
-NPXL shortpin hiltside connector (V3 or ECO)
-qty.2 of 1.5mm brass tactile switches (included with chassis)
-6 Trace Rotary Chassis PCB set
-removable 18650 button top protected cell (Option 2 battery contacts included with chassis)
-high amp killswitch
-22mm or 24mm speaker
FULL PARTS KIT includes:
-choice of soundboard (CFX, ProffieV3.9, GHV3)
-qty. 1 assembled NPXL V3 shortpin hiltside connector
-qty.1 KeepPower 18650 3000mah 15A button top protected cell
-qty. 1 high amp killswitch
-qty.1 unassembled 6 Trace Rotary Chassis PCB set
-qty.1 Veco 22mm or 24mm 4ohm/3W bass speaker
