Korbanth Oppressor Double Crystal Chamber Install Chassis

Double crystal chamber install chassis made specifically for the JSJ/Korbanth Oppressor staff hilt. Chassis design is made by Jimmy's Saber Junk. 

To see the chassis in action, follow this link

Part 1: holds both soundboards, both speakers, both batteries, both killswitches, and optional mini LED strips

Part 2: for single crystal chamber, part of SCW Rotary Chassis PCB set, single crystal illuminated by single pixel accent LED, and optional motor and stabilizer(Part 5 and 6)

Part 3: Same as part 2, but for opposite end of the hilt

Part 4: Requires two of this same part, holds the tactile switches, NPXL shortpin connector, and other part of SCW Rotary Chassis PCB set

Part 5: optional part to hold motor for spinning crystal chamber(needs two per chassis)

Part 6: optional part for stabilizing the motor(needs two per chassis)

Total parts list:
-CFX, Proffie, or GHV3(requires two of each soundboard per staff install)
-Quantity of 2 KeepPower 18350 high amp battery, uses 18650 spring loaded battery contacts(Option 1 battery contacts provided with physical chassis prints)
-Quantity of 2 NPXL shortpin connectors
-Quantity of 1 SCW 6-Trace Rotary Chassis PCB sets
-Quantity of 4 1.5mm brass tactile switches(provided with physical chassis prints)
-Quantity of 2 22mm Veco bass speakers
-Quantity of 2 high amp killswitches
-Quantity of 2 single pixel accent LED"s for crystal chamber illumination
-optional mini WS2812 LED strips
-optional motor for spinning crystal chamber

FULL PARTS KIT includes:
-choice of 2 soundboards (CFX, ProffieV3.9, GHV3)
-qty. 2 assembled NPXL V3 shortpin hiltside connector
-qty. 2 single pixel accent LED
-qty.2 KeepPower 18350 1200mah 10A button top protected cell
-qty. 2 high amp killswitch
-qty.1 unassembled 6 Trace Rotary Chassis PCB set
-qty.4 10 LED mini pixel strips
-qty.2 Veco 22mm 4ohm/3W bass speaker
-qty.2 DIY motors